GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Chevy Suburban - 4WD 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Clock Replacement

Removal Procedure
  1. Remove the console upper console by firmly grabbing the corners and pulling outwards.

    2. Object Number: 759161 Size: SH
  2. Disconnect the electrical connector from the clock.
  3. Remove the clock retaining screws.
  4. Remove the clock from the bezel.

Installation Procedure

    Object Number: 759161 Size: SH
  1. Install the clock to the bezel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the clock retaining screws.

    3. Tighten
    Tighten the nut to 2 N·m (18 lb in).

  3. Connect the electrical connector to the clock.
  4. Install the floor console bezel by pushing in the corners.