Preliminary Procedure

1. Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete.
2. Flip and fold the rear seat forward.

1

Rear Seat Frame Outer Finish Cover

Procedure

Pull upward to disengage the retainer clips.

2

Rear Seat Riser Finish Cover

Procedure

1. Pull upward to disengage the retainer clips.
2. For reinstallation use the 3 locators to align part properly.
3. Engage upper and lower front clips to the back edge of rear seat frame front finish cover. To finish installation process move rearward along the cover. Part is properly installed when all edges are aligned with rear seat frame front finish cover.

3

Rear Seat Frame Front Finish Cover

Procedure

1. Fold the rear seat down and latch in place to access the finish cover.
2. Pull forward to disengage the retainer clips.