Vehicle Yaw Sensor with Vehicle Lateral and Longitudinal Accelerometer Replacement. Chevrolet Chevy Suburban

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Chevy Suburban - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Vehicle Yaw Sensor with Vehicle Lateral and Longitudinal Accelerometer Replacement

Callout	Component Name
Preliminary Procedures Remove the passenger seat. Refer to Front Seat Replacement - Bucket. Pull back the carpet to gain access to the yaw sensor. Disconnect the yaw rate sensor electrical connector.
1	Yaw Rate Sensor Nut (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 7 N·m (62 lb in)
2	Yaw Rate Sensor Procedure After the installation is complete, install a scan tool to the vehicle. Using the special functions menu on the scan tool, reset the yaw rate sensor. Perform the Diagnostic System Check - Vehicle.

Callout

Component Name

Preliminary Procedures

Remove the passenger seat. Refer to Front Seat Replacement - Bucket.
Pull back the carpet to gain access to the yaw sensor.
Disconnect the yaw rate sensor electrical connector.

Yaw Rate Sensor Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
7 N·m (62 lb in)

Yaw Rate Sensor

Procedure

After the installation is complete, install a scan tool to the vehicle.
Using the special functions menu on the scan tool, reset the yaw rate sensor.
Perform the Diagnostic System Check - Vehicle.