Engine Mount Bracket Replacement - Left Side 2500 w/RPO LY6

1. Remove the engine mount. Refer to Engine Mount Replacement - Left Side .
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.

1. Position the engine mount bracket onto the frame.
2. Perform the following steps prior to installing the engine mount bracket bolts.

•	Remove all traces of the original adhesive patch.

•	Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.

•	Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the engine mount bracket bolts.

Tighten
Tighten the bolts to 65 N·m (48 lb ft).

4. Install the engine mount. Refer to Engine Mount Replacement - Left Side .