Did you perform the Fog Lights System Check?

--

Go to Step 2

Go to Fog Lights System Check

1. Access the fog lamp switch connector.
2. Connect a J 35616-200 from the fog lamp switch connector, cavity E, to ground.
3. Depress the fog lamp switch.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

Repair the open in CKT 34 (PPL) between the fog lamp switch and splice S165.

Is the repair complete?

--

Go to Fog Lights System Check

--

Inspect CKT 150 (BLK) between the fog lamp switch and G200 for an open circuit and repair as necessary.

Did you find and correct the condition?

--

Go to Fog Lights System Check

Go to Step 5

Replace the fog lamp switch.

Is the repair complete?

--

Go to Fog Lights System Check

--