Did you perform the Headlights System Check?

--

Go to Step 2

Go to Headlight System Check

1. Disconnect the right high beam headlamp connector.
2. Connect a J 39200 between the right high beam headlamp connector, cavity A (base), cavity B (quad) for CKT 250 (BLK), and ground.

Is there continuity?

--

Go to Step 3

Go Step 4

1. Place the headlamp and panel dimmer switch in the headlamp position.
2. Operate the headlamp dimmer switch in order to select the high beam position.
3. Connect a J 35616-200 between the right high beam headlamp connector, cavity B (base), cavity A (quad)for CKT 11 (LT GRN), and ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 6

Repair the open in CKT 250 (BLK) between the right high beam headlamp and G112.

Is the repair complete?

--

Go to Headlight System Check

--

Replace the right high beam headlamp socket if the filament is not open.

Is the repair complete?

--

Go to Headlight System Check

--

Repair the open in CKT 11 (LT GRN) between S121 and the right high beam headlamp.

Is the repair complete?

--

Go to Headlight System Check

--