Did you perform the Headlight System Check?

--

Go to Step 2

Go to Headlight System Check

1. Disconnect the left low beam headlamp connector.
2. Connect a J 39200 between the left low beam headlamp connector, cavity A (base), cavity B (quad) for CKT 150 (BLK) and ground.

Is there continuity?

--

Go to Step 3

Go to Step 4

1. Place the headlamp and panel dimmer switch in the headlamp position.
2. Operate the headlamp dimmer switch in order to select the low beam position.
3. Connect a J 35616-200 between the left low beam headlamp connector, cavity C (base) cavity A (quad) for CKT 12 (TAN) and ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 6

Repair the open in CKT 150 (BLK) between the left low beam headlamp and G113.

Is the repair complete?

--

Go to Headlight System Check

--

If the filament is not open, replace the left low beam headlamp socket.

Is the repair complete?

--

Go to Headlight System Check

--

Repair the open in CKT 12 (TAN) between S120 and the left low beam headlamp.

Is the repair complete?

--

Go to Headlight System Check

--