Dome Lamp Replacement All Models Except Suburban

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable(s).



2. Remove the lens (5).
3. Remove the bulb (2).
4. Remove the housing screws (6).
5. Remove the lamp assembly (4).
6. Disconnect the electrical connector (1).
7. Remove the bezel (3).

1. Install the bezel (3).
2. Connect the electrical connector (1).
3. Install the lamp assembly (4).
4. Install the housing screws (6).
5. Install the bulb (2).
6. Install the lens (5).
7. Connect the negative battery cable(s).

Dome Lamp Replacement Suburban

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable(s).



2. Remove the lens.
3. Remove the bulb.
4. Remove the housing screws.
5. Remove the housing assembly.
6. Disconnect the electrical connector.
7. Remove the bezel.

1. Install the bezel.
2. Connect the electrical connector.
3. Install the housing assembly.
4. Install the housing screws.
5. Install the bulb.
6. Install the lens.
7. Connect the negative battery cable(s).