CAMPAIGN : REAR AXLE SHAFTS MAY BREAK SUPPLEMENT

The following information is a supplement to the Service Procedure "Example" section of Campaign Bulletin 82C16, issued August, 1982.

SERVICE PROCEDURE

LIGHT DUTY TRUCK REAR AXLE IDENTIFICATION

EXAMPLE

INCORRECT

TKK 001 G 1

Axle & Vehicle Code Date Code Source Code Shift Code Jan. 1 = 001 G = Gear & Axle 1st Shift

CORRECT

TKK G 001 1

Axle & Vehicle Code SOURCE CODE DATE CODE Shift Code G = Gear & Axle Jan. 1 = 001 1st Shift

CODE IS STAMPED ON TOP OF RIGHT AXLE TUBE OUTBOARD OF CARRIER.

Axle assemblies with source code "G" and date codes of 134 through 161 will require the replacement of both right and left rear axle shafts.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.