DELCO-REMY GENERATORS TYPE 200 NO WIRE HARNESS CONNECTORS

MOST MEDIUM DUTY GENERATORS HAVE AN EXTERNALLY ENERGIZED FIELD UTILIZING THE NO. 1 AND NO. 2 GENERATOR TERMINALS AND A SEPARATE WIRING HARNESS EQUIPPED WITH A TWO-WAY CONNECTOR (FIGURE NO. 1). HOWEVER, THE 27-SI TYPE 200 GENERATOR IS SELF-ENERGIZING AND DOES NOT REQUIRE THIS HARNESS (FIGURE NO. 2). WHEN THE 27-SI TYPE 200 GENERATOR IS USED, THE "EXTRA" WIRES ARE TAPED BACK ON THE HARNESS. IF THE TAPED BACK PORTION OF THE HARNESS IS CONNECTED TO A TYPE 200 GENERATOR IN ERROR, THE VOLTAGE REGULATOR MAY BE DAMAGED AND AND THE BATTERIES MAY DISCHARGE. TYPE 200 GENERATORS ARE USED ONLY WITH DIESEL ENGINES AND ARE IDENTIFIED AS FOLLOWS: PART NUMBER AMPS ----------- ---- 1105460 65 1105465 80 1105472 100

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.