GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Remove the instrument panel trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.

  2. Object Number: 412186  Size: SH
  3. Remove the I/P module switch from the lower right opening of the switch plate panel.
  4. Disconnect the I/P module switch electrical connector.

Installation Procedure

  1. Connect the I/P module switch electrical connector.

  2. Object Number: 412186  Size: SH
  3. Install the I/P module switch into the lower right opening of the switch plate panel.
  4. Install the instrument panel trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.