Front Floor Console Compartment Replacement Pro

1. Open the console lid and remove the 6 retaining screws (1).



2. Remove the 4 console bin retaining bolts (1).
3. Lift the console bin and lid assembly in order to pull out the electric cord.
4. Remove the console bin and lid assembly from the console.

1. Place the console bin and lid assembly over the console in order to route the electrical cord to the console bin.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the console bin and lid assembly to the console.

Important: Ensure the rear bolts has the bigger washer.




3. Install the 4 console bin retaining bolts (1).

Tighten
Tighten the 4 bolts to 3.5 N·m (35 lb in).

Important: Ensure the longer screw is installed in the front of the console bin.




4. Install the 6 retaining screws (1).

Tighten
Tighten the 6 screws to 1.6 N·m (14 lb in).

Front Floor Console Compartment Replacement Expect Pro

1. Remove the console compartment door. Refer to Console Compartment Door Replacement .



2. Remove the bin retaining screws.
3. Remove the 4 lower bolts.
4. Remove the storage bin from the console.

1. Install the storage bin in the console.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bin retaining screws.

Tighten
Tighten the retaining screws to 1.6 N·m (14 lb in).

3. Install the 4 lower bolts

Tighten
Tighten the 4 bolts to 3.5 N·m (31 lb in).

4. Install the console compartment door. Refer to Console Compartment Door Replacement .