Your vehicle may have some or all of the following labels.

If the vehicle is equipped with a load disconnect switch, the switch disconnects 12V vehicle loads and 24V trailer/aux loads that could cause a parasitic drain on the batteries.

The switch should be placed in the OFF position when the vehicle is parked for an extended period of time. The load disconnect switch is located on the underhood fuse block. The underhood fuse block is located on the driver’s side of the vehicle, to the rear of the battery or under the accessory panel of the ambulance body.

The 24V battery caution label is placed on top of the radiator support near the 24V battery. This battery is on the left side of the engine compartment.

The vehicle identification plate is located on the left front inner door panel under the shipping data plate. This plate includes the identification number, contract number and vehicle variant.

The shipping data plate is located on the left front inner door panel above the vehicle identification plate. This plate includes the loading and dimensions.