Blackout Headlamp Replacement LSSV

1. Remove the nut and washer (3) from the lamp stud at the base of the mounting bracket.
2. Remove the ground lead (4) by sliding it off the stud.
3. Disconnect the auxiliary wiring harness connector (2) from the headlamp.
4. Remove the blackout (B/O) lamp assembly (1) from the mounting bracket.

1. Install the blackout (B/O) lamp assembly (1) to the mounting bracket.
2. Connect the auxiliary wiring harness connector (2).
3. Install the ground lead (4) by sliding it on the stud.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the washer and nut (3) to the lamp stud.

Tighten
Tighten the nut to 10 N·m (89 lb in).

Blackout Headlamp Replacement Ambulance/Maintenance Body

1. Remove the nut and washer (3) from the lamp stud at the base of the mounting bracket.
2. Remove the ground lead (4) by sliding it off the stud.
3. Disconnect the auxiliary wiring harness connector (2) from the headlamp.
4. Remove the blackout (B/O) lamp assembly (1) from the mounting bracket.

1. Install the blackout (B/O) lamp assembly (1) to the mounting bracket.
2. Connect the auxiliary wiring harness connector (2).
3. Install the ground lead (4) by sliding it on the stud.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the washer and nut (3) to the lamp stud.

Tighten
Tighten the nut to 10 N·m (89 lb in).