Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Cylinder Power Balance | Fuel System | Disables each injector. The Device control will not change unless changed or cancelled by the scan tool. Device Control can be changed at any engine or vehicle speed. |
EGR Throttle Valve Solenoid | Engine Output Controls | Activates the exhaust gas recirculation (EGR) throttle valve solenoid ON or OFF. The Device Control will not change unless changed or cancelled by the scan tool. |
EGR Solenoid | Engine Output Controls / EGR System | Activates the EGR control solenoid in 10 percent increments from 0-100 percent. The Device Control will not change unless changed or cancelled by the scan tool. |
EGR System Seal | Engine Output Controls / EGR System | Activates the EGR vent solenoid Not Venting. Commands the EGR Solenoid to 0 %. This seals the EGR vacuum system. The Device Control will not change unless changed or cancelled by the scan tool. |
EGR Vent | Engine Output Controls / EGR System | Activates the EGR vent solenoid ON or OFF. The Device Control will not change unless changed or cancelled by the scan tool. |
Fuel Pressure Control | Engine Output Controls | Activates the Fuel Pressure Regulator in 10 percent increments from 0-100 percent. The Device Control will not change unless changed or cancelled by the scan tool. |
Fuel Pump | Engine Output Controls | Activates the fuel transfer pump ON or OFF. The Device Control will not change unless changed or cancelled by the scan tool. |
FRP Regulator Relay | Engine Output Controls | Activates the FRP Regulator Relay, ignition 1 relay ON or OFF. The Device Control will not change unless changed or cancelled by the scan tool. DTC U1800 may set when turning the relay OFF. |
Glow Plug | Engine Output Controls | Activates the Glow Plug Relay ignition 1 relay ON or OFF. The Device Control will be aborted after 12 seconds for the first activation, and after 5 seconds for every other activation. Device control is inhibited if the engine is running. |
Intake Air Heater | Engine Output Controls | Activates the intake air heater relay ON or OFF. The Device Control will not change unless changed or cancelled by the scan tool. |
Malfunction Indicator Lamp | Engine Output Controls | Activates the malfunction indicator lamp (MIL). The MIL will remain illuminated until cancelled by the scan tool. |
RPM Control | Fuel System | Adjusts the engine speed in 25, 100, or 500 RPM increments. The Device Control will not change unless changed or cancelled by the scan tool. |
