GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 36513 Gear and Bearing Separator Plate


    Object Number: 663686  Size: SH

    Important: 

       • Only remove the bearings if replacing the bearings. Do not use the bearings again after removal.
       • You must also replace the race for the bearing being replaced.

  1. Inspect the bearing for damage or wear. Refer to Bearings and Spacers Cleaning and Inspection .
  2. Using a hydraulic press and the J 36513  (1), remove the input shaft bearing.

  3. Object Number: 663697  Size: SH
  4. Remove the input shaft oil deflector using a suitable prying tool.
  5. Discard the input shaft oil deflector after removal.