GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Important: Do not grab or pull on the CD storage door when removing the trim bezel.


    Object Number: 387749  Size: SH
  1. Remove the screws securing the trim bezel to the console extension.
  2. Protect the console extension from damage then carefully use a small prying device to push in the tabs underneath the trim bezel securing the top of the trim bezel.
  3. Remove the trim bezel.
  4. To remove the bezel on the luxury console, refer to Floor Console Bezel Replacement in Instrument Panel, Gages and Console.

  5. Object Number: 386712  Size: SH
  6. Use a small screwdriver in order to release the CD player retainers.
  7. Slide the CD player out .
  8. Disconnect the electrical connector.

Installation Procedure


    Object Number: 386712  Size: SH
  1. Connect the electrical connector.
  2. Install the CD player.
  3. When the CD player is fully seated, snap the unit into the retainers.
  4. To install the bezel on the luxury console, refer to Floor Console Bezel Replacement in Instrument Panel, Gages and Console.
  5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 387749  Size: SH
  6. Install the trim bezel and the screws.
  7. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  8. Verify the component operation.