Important: Parts that are to be reused must be marked, sorted, and organized for assembly.
- Mark, sort, and organize the components for assembly.
Caution: Wear safety glasses in order to avoid eye damage.
- Clean the components with cleaning solvent.
- Dry the components with compressed air.
- Inspect the valve rocker arm components for the following:
| • | Valve rocker arm valve pushrod socket contact surface (1) |
| • | The contact surface must be smooth with no scoring or excessive wear. |
| • | Valve rocker arm roller pivot for binding or damage (2) |
| • | Valve rocker arm valve stem contact surface (3) |
| • | The contact surface should be smooth with no scoring or excessive wear. |
| • | Valve rocker arm bolt threads for damage (4) |
- Inspect the valve pushrods for the following:
| • | Restriction of the oil passage (1) |
| • | Wear or scoring of the end contact surfaces (2) |
| • | The end contact surfaces must be smooth with no scoring or excessive wear. |
| • | Roll the valve pushrod on a flat surface to determine if the valve pushrod is bent. |
- Inspect the valve rocker support for excessive wear or damage.
