The column mounting bracket bolts are loose.

Tighten the connection. Refer to Fastener Tightening Specifications .

The weld nut on the jacket is broken.

Replace the jacket assembly. Refer to the appropriate procedure from the following list:

The column bracket capsule is sheared.

Replace the jacket assembly. Refer to the appropriate procedure from the following list:

The tilt head pivot pins are loose.

Replace the jacket assembly. Refer to the appropriate procedure from the following list:

The shoe lock pin in the support is loose.

Replace the jacket assembly. Refer to the appropriate procedure from the following list:

The support screws are loose.

Tighten the support screws. Refer to Fastener Tightening Specifications .

The upper and the lower bracket to jacket bolts are loose.

Tighten the bolts to the specified torque. Refer to Fastener Tightening Specifications .

The lower bracket to adapter and bearing assembly mounting bolts are loose.

Tighten the mounting screws to the specified torque. Refer to Fastener Tightening Specifications .

The instrument panel to jacket mounting bolts are loose.

Tighten the mounting bolts to the specified torque. Refer to Fastener Tightening Specifications .