GM Service Manual Online
For 1990-2009 cars only

A/T LINES CRACKED/LEAKING (REPLACE LINES/INST. BRACKET)

Subject: AUTOMATIC TRANSMISSION LINES CRACKED OR LEAKING

Model and Year: 1988-92 C/K TRUCKS WITH 6.2L DIESEL ENGINE

Some owners of 1988-92 C/K trucks equipped with a 6.2L diesel engine and a 4L60 or THM400 (RPO MD8 or M40) automatic transmission may experience cracked or leaking automatic transmission cooler lines at or near the transmission fittings.

These cracks may be caused by the cooler lines going into resonance or vibrating at low engine idle speeds causing the lines to fatigue. To correct this condition, replace the cracked/leaking lines and install a support bracket.

SERVICE PROCEDURE:

1. Replace the cracked/leaking line(s) using tubing (P/N 1324714).

* Double flare both ends of the line and form the line to match the shape of the line which was removed.

2. Install a bracket assembly (P/N 15684042 (C-Truck) (Figure 1) or P/N 15684043 (K-Truck) (Figure 2)) to the transmission inspection cover bolt.

3. Install a clamp (P/N 15518639) around the transmission cooler lines and attach it to the bracket assembly with a bolt (P/N 1 1 508023) (Figures 1 and 2).

SERVICE PARTS INFORMATION

Part Number Description Qty Reqd ----------- ----------- --------- 15684042 Bracket, Trans Oil 1 Clr Pipe Clip (C-Truck)

15684043 Bracket, Trans Oil 1 Clr Pipe Clip (K-Truck)

15518639 Clamp, Fuel Supply 1

11508023 Bolt, M6x1x16 1

1324714 Tubing, 5/16" 0D x 25' As Required

Parts are currently available from GMSPO.

WARRANTY INFORMATION

For vehicles repaired under warranty use:

Labor 0p. Description --------- ----------- K5262 Repair/Replace Upper Trans Cooler Line and Install Bracket

K5263 Repair/Replace Lower Trans Cooler Line and Install Bracket

K5267 Repair/Replace Both Trans Cooler Lines and Install Bracket

Use applicable labor time guide for labor hours.


Object Number: 83212  Size: FS


Object Number: 83211  Size: FS

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.