UPDATE ON LAUNCH FIX NEW MODULE AVAILABLE

A SERVICE FIX HAS BEEN DEVELOPED TO INSTALL A NEW MODULE IN EARLY BUILT 1983 "C-K-G" TRUCKS WITH THE LE9 ENGINE AND MANUAL TRANSMISSIONS TO ASSIST LAUNCHING THE VEHICLE. THIS SERVICE FIX CONTAINS A NEW MODULE THAT WILL ASSIST LAUNCHING THE VEHICLE BY LIMITING THE SPARK RETARD FOR FIVE (5) SECONDS AFTER THE CLUTCH IS ACTIVATED. TRUCKS BUILT WITH THE NEW CONTROL MODULE CAN BE IDENTIFIED BY THE FOLLOWING MEANS: - A 12 GAUGE YELLOW WIRE ATTACHED TO PIN D ON MODULE ASSEMBLY. - MODULE, P/N 16031121, BROADCAST CODE OF BPW. A VEHICLE WITHOUT THE NEW MODULE WILL HAVE P/N 16026481 BROADCAST CODE BLM MODULE. THE CONTROL MODULE IS LOCATED IN THE FOLLOWING PLACES: - "G" VAN - UNDER DRIVER'S SEAT. - "C-K" TRUCKS - RIGHT SIDE OF INSTRUMENT PANEL BEHIND GLOVE BOX. EACH SERVICE KIT WILL INCLUDE A NEW MODULE, A SERVICE ONLY JUMPER, CONNECTOR, STRAPS AND INSTRUCTION SHEET. SERVICE KIT PART NUMBERS ARE: - "C-K" 10-20 SERIES TRUCKS - P/N 15598431. - "G" 10-20 SERIES VANS - P/N 15598430. LABOR OPERATION NUMBER: T1102 LABOR TIME : "C" "G" "K" .5 .6 .5 WITH A/C .2 .2

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.