Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Tighten
Tighten the exhaust outlet clamp to 15 N·m (11 lb ft).

Tighten
Tighten the exhaust outlet to right exhaust pipe bracket bolt to 34 N·m (25 lb ft).

Tighten
Tighten the exhaust outlet heat shield bolts to 10 N·m (89 lb in).