GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1334865  Size: SH
  1. Remove the cooling fan pulley. Refer to Cooling Fan Pulley Replacement .
  2. Remove the camshaft position (CMP) sensor bolt.
  3. Remove the CMP sensor.

Installation Procedure


    Object Number: 1334865  Size: SH
  1. Lubricate the CMP sensor O-ring with clean engine oil.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the CMP sensor.
  4. Install the CMP sensor bolt.
  5. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  6. Install the cooling fan pulley. Refer to Cooling Fan Pulley Replacement .