For 1990-2009 cars only
- Install the scan tool.
- Apply the vehicle's parking brake.
- Block the drive wheels.
- Close the vehicle's hood.
- Place the vehicle's transmission in Park (A/T) or Neutral (M/T).
- Idle the engine until the engine coolant temperature reaches 65°C (150°F).
- Turn OFF all the accessories.
- Apply the brakes for the duration of the procedure.
- Enable the Crankshaft Position System Variation Learn Procedure with the scan tool.
- Slowly raise the engine speed to 4000 RPM.
- Immediately release the throttle when the engine speed decreases.
- Turn OFF the ignition for 15 seconds after the learn procedure is completed successfully.
Important: While the learn procedure is in progress, release the throttle immediately when the engine starts to decelerate. The engine control is returned to the operator and the engine will respond to throttle position after the learn procedure is complete.
Important: If the CKP System Variation Learn Procedure cannot be completed successfully, refer to DTC P1336 Crankshaft Position (CKP) System Variation Not Learned for additional diagnostic information.
