| Subject: | Release of New Tools for Service: J 37228 - Oil Pan Seal Cutter,
J 41736 - Installer (Rear Output Shaft Seal) and DT 46717 -
Rear Output Shaft Seal Remover |
| Models: | 1999-2003 Chevrolet W-Series Medium Duty Tilt Cab Models |
| 1999-2003 GMC W-Series Medium Duty Tilt Cab Models |
| 1999-2003 Isuzu NPR/NQR Commercial Medium Duty Models |
| with Aisin Automatic Transmission |
The following special service tools are being released to Medium Duty dealers
to service the oil pan gasket (silicone gasket) and the rear output shaft seal on
the above-listed models.
| • | J 37228 - Oil Pan Seal Cutter |
| • | J 41736 - Installer (Rear Output Shaft Seal) |
| • | *DT 46717 - Rear Output Shaft Seal Remover |
*The DT Function Code represents the Transmission category under the new Global
Tool numbering system. Corporate Bulletin Number 03-00-89-005, dated March
2003 describes the tool numbering system.
Refer to the applicable year W-Series Service Manual for Oil Pan Gasket and
Rear Output Shaft Seal removal and installation procedures.
