GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Preface 🢒 Cautions and Notices 🢒 Driver or Passenger Seat Outer Adjuster Finish Cover Replacement

Driver or Passenger Seat Outer Adjuster Finish Cover Replacement with Power Seat


Object Number: 1868490 Size: MF

Callout

Component Name

1

Front Seat Outer Adjuster Finish Cover Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Seat Outer Adjuster Finish Cover

Procedure

  1. Release the rear of the adjuster cover first.
  2. Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.
  3. Disconnect the power seat switch electrical connector.

Driver or Passenger Seat Outer Adjuster Finish Cover Replacement without Power Seat


Object Number: 1868488 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the seat adjuster handle. Refer to Driver Seat and Passenger Seat Adjuster Handle Replacement.
  2. Remove the front seat recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement.

1

Front Seat Outer Adjuster Finish Cover Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Seat Outer Adjuster Finish Cover

Procedure

  1. Release the rear of the adjuster cover first.
  2. Pull outward from the bottom of the adjuster cover and push upward to release the cover from the seat cushion frame.