Preliminary Procedures

1. Drain the cooling system. Refer to Cooling System Draining and Filling.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Generator Control Module Coolant Pump Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Generator Control Module Coolant Pump

Tip

1. Using SA9111E reposition the hose clamps on the generator control module coolant pump.
2. Remove the hoses from the generator control module coolant pump.