GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva Sport 🢒 Engine 🢒 Engine Electrical 🢒 Battery Box Replacement

Removal Procedure
  1. Remove the battery. Refer to Battery Replacement .

    2. Object Number: 1876976 Size: SH
  2. Remove the battery cable cooling air inlet duct plastic retainer (1).
  3. Remove the battery cable cooling air inlet duct (2).
  4. Disconnect any electrical harnesses attached to the battery box.

    5. Object Number: 1876974 Size: SH
  5. Remove the battery box bolts (1).
  6. Remove the battery box (2).

Installation Procedure

    Object Number: 1876974 Size: SH
  1. Install the battery box (2) to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the battery box bolts (1).

    3. Tighten
    Tighten the bolts to 20 N·m (15 lb ft).

  3. Connect any previously disconnected electrical harnesses to the battery box.

    4. Object Number: 1876976 Size: SH
  4. Install the battery cable cooling air inlet duct (2).
  5. Install the battery cable cooling air inlet duct plastic retainer (1).
  6. Install the battery. Refer to Battery Replacement .