For 1990-2009 cars only
Removal Procedure
- Remove the battery positive and negative cable. Refer to Battery Positive and Negative Cable Replacement .
- Mark the location of the battery current sensor on the battery positive and negative cable with tape for reference during installation.
- Remove the tape securing the battery current sensor to the battery positive and negative cable.
- Mark the location of the battery positive and negative cable clips and remove the clips from the cable.
- Squeeze the battery positive and negative cable branches together.
- Slide the battery current sensor (1) off of the battery positive and negative cable.
Important: Note the orientation of the battery current sensor prior to removal.
Installation Procedure
- Squeeze the battery positive and negative cable branches together.
- Slide the NEW battery current sensor (1) up onto the battery positive and negative cable to the location previously marked during removal.
- Wrap electrical tape around the battery current sensor leg in order to secure the sensor to battery positive and negative cable.
- Install the battery positive/negative cable clips to the locations previously marked during removal.
- Install the battery positive and negative cable. Refer to Battery Positive and Negative Cable Replacement .
Important: Ensure the battery current sensor is installed in the correct direction and location on the battery positive and negative cable.
