GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Captiva 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 929945 Size: SH
  2. Remove the stabilizer bar clamp to cradle bolts.
  3. Remove the stabilizer bar clamps and bushings from the stabilizer bar.

Installation Procedure

    Object Number: 929945 Size: SH
  1. Install the stabilizer bar clamps and bushings to the stabilizer bar.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer bar clamp to cradle bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  3. Lower the vehicle.