GM Service Manual Online
For 1990-2009 cars only

Object Number: 1957074  Size: MF

Callout

Component Name

Notice: Refer to General Repair Instructions in the Preface section.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Place a suitable drain pan under the transmission.

1

Transmission Fluid Pan Bolt (Qty: 18)

Tip
Tighten the bolts in the sequence shown.

Tighten
9 N·m (80 lb. in)

2

Transmission Fluid Pan Assembly

    • Check the condition of the draining fluid. Refer to Transmission Fluid Check .
    • Fill the transmission with the proper fluid. Refer to Transmission General Specifications .
    • Fill the transmission with the proper amount of transmission fluid. Refer to Fluid Capacity Specifications and Transmission Fluid Check .

3

Transmission Fluid Pan Gasket

Tip
The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused.

4

NEW Fluid Filter Assembly

Tip
Pull the fluid filter assembly straight out. Do not bend or twist the filter neck.

5

NEW Fluid Filter Seal Assembly

Notice: Refer to Fastener Notice in the Preface section.

Notice: Refer to General Repair Instructions in the Preface section.

    • Use a screwdriver or snap ring pliers to remove the filter seal.
    • Use the DT 47848 and the J 42183 to install the filter seal.
    • Lubricate the filter seal with transmission fluid before installing the filter.

6

    • DT 47848 .
    • J 42183 .