GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Caprice WM 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Door Sill Trim Plate Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.

    2. Object Number: 1939763 Size: SH
  2. Remove the retaining torx screw (1) from the rear sill panel trim.
  3. Remove the retaining pin (2) and remove the rear sill panel trim by pulling from the lower edge and disengaging the retaining clips.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.

  1. Install the rear sill panel trim.

    2. Object Number: 1939763 Size: SH
  2. Install the rear sill panel trim retaining torx screw (1).

    3. Tighten
    Tighten the torx screw (1) to 2.0  N·m (18 lb in).

  3. Install the rear sill panel trim retaining pin (2).
  4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.