For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the rear wheels. Refer to Tire and Wheel Removal and Installation .
- Disconnect the wheel speed sensor electrical connector (1).
- Remove the wheel speed sensor to knuckle retaining bolt (3).
- Remove the wheel speed sensor (2) from the knuckle (1).
Caution: Refer to Safety Glasses Caution in the Preface section.
Caution: Refer to Vehicle Lifting Caution in the Preface section.
Caution: Refer to Brake Dust Caution in the Preface section.
Installation Procedure
- Install the wheel speed sensor (2) to the knuckle (1).
- Install the wheel speed sensor to knuckle retaining bolt (3).
- Connect the wheel speed sensor jumper harness electrical connector (1).
- Install the rear wheels. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle.
Caution: Refer to Safety Glasses Caution in the Preface section.
Caution: Refer to Vehicle Lifting Caution in the Preface section.
Caution: Refer to Brake Dust Caution in the Preface section.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolt to 7 Nm (62 lb in).
