For 1990-2009 cars only
- Install a NEW exhaust manifold gasket (1) and NEW sealing ring (3) to the exhaust manifold (2).
- Install the exhaust manifold assembly to the engine.
- Install the NEW exhaust manifold to cylinder head retaining bolts (1).
- Tighten the exhaust manifold to cylinder head retaining bolts (1) working from the centre to the outside.
Notice: Refer to Exhaust System Inspection Notice in the Preface section.
Important: DO NOT fully tighten the exhaust manifold to cylinder head retaining bolts (1) at this stage.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts to 20 N·m (15 lb ft).
