GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Clutch Pedal Position Switch Replacement

Removal Procedure

    Object Number: 350142 Size: SH
  1. Remove the instrument panel driver knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the clutch pedal position switch electrical connector (2).
  3. Pull up to disengage the clutch pedal position switch (3) from the pedal bracket (1).
  4. Remove the clutch pedal position switch (3).

Installation Procedure

    Object Number: 350142 Size: SH
  1. Install the clutch pedal position switch (3).
  2. Align the buttons on the clutch pedal position switch (3) to the slotted holes on the bracket (1).
  3. Press the clutch pedal position switch (3) down until secure.
  4. Connect the clutch pedal position switch electrical connector (2).
  5. Install the instrument panel driver knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages and Console.