GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Transmission/Transaxle 🢒 Manual Transmission - MM6 🢒 Control Lever Handle Replacement

Removal Procedure

    Object Number: 33327 Size: SH
  1. Remove the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  2. Remove the control lever handle bolt (2).
  3. Remove the control lever handle (1).

Installation Procedure

    Object Number: 33327 Size: SH
  1. Install the control lever handle (1) to the shift control.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the control lever handle bolt (2).

    3. Tighten
    Tighten the control lever handle bolt (2) to 25 N·m (18 lb ft).

  3. Install the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.