GM Service Manual Online
For 1990-2009 cars only

Circuit Description

The ABS Diagnostic System Check is an organized approach to identify problems associated with the EBCM. This check must be the starting point for any EBCM complaint, and will direct you to the next logical step in diagnosing the complaint. The EBCM is a very reliable component and is not likely the cause of the malfunction. Most system complaints are linked to faulty wiring, connectors, and occasionally to components. Understanding the ABS system and using the tables correctly will reduce diagnostic time and prevent unnecessary parts replacement.

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. Lack of communication may be due to a partial malfunction of the serial data circuit or due to a total malfunction of the serial data circuit. The specified procedure will determine the particular condition.

  2. The presence of DTCs which begin with "U" indicate some other module is not communication. The specified procedure will compile all the available information before tests are performed.

Step

Action

Yes

No

1

Install a scan tool.

Does the scan tool power up?

Go to Step 2

Go to Scan Tool Does Not Power Up In Data Link Communications

2

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communications with the following control modules:
    • Electronic brake control module (EBCM)
    • Instrument panel module (IPC)
    • Powertrain control module (PCM)

Does the scan tool communicate with the control modules?

Go to Step 3

Go to Scan Tool Does Not Communicate with Class 2 Device In Data Link Communications

3

Select the display DTCs function on the scan tool for the following control modules:

    • Electronic brake control module (EBCM)
    • Instrument panel module (IPC)
    • Powertrain control module (PCM)

Does the scan tool display any DTCs?

Go to Step 4

Go to Symptoms - Antilock Brake System

4

Does the scan tool display any DTCs which begin with a U (i.e. DTC U1000, U1016 or U1300, U1301)?

Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications

Go to Diagnostic Trouble Code (DTC) List For The Applicable DTC