GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Camaro 🢒 Engine 🢒 Engine Cooling 🢒 Drive Belt Tensioner Replacement

Removal Procedure

    Object Number: 282933 Size: SH
  1. Drain the engine coolant. Refer to Cooling System Draining and Filling in Engine Cooling.
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the generator. Refer to Generator Replacement in Engine Electrical.
  4. Remove the heater hoses from the drive belt tensioner.

    5. Object Number: 441249 Size: SH
  5. Remove the drive belt tensioner bolts (3).

    6. Important: The drive belt tensioner (2) must be rotated if it is difficult to remove. Pulling the tensioner (2) from the top may damage the engine front cover. If necessary, break the plastic thermostat bypass upper pipe (1) to allow rotation of the drive belt tensioner (2), replace the pipe during installation.

  6. Remove the drive belt tensioner (2).
  7. Remove the thermostat bypass pipes (1, 4) from the tensioner (2), if necessary.

Installation Procedure

    Object Number: 441249 Size: SH
  1. Install the thermostat bypass pipes (1, 4) to the tensioner, if necessary.
  2. Install the drive belt tensioner (2) to the engine.
  3. Install the drive belt tensioner bolts (3).

    4. Tighten
    Tighten the drive belt tensioner bolts (3) to 50 N·m (37 lb ft).


    Object Number: 282933 Size: SH
  4. Install the heater hoses to the drive belt tensioner.
  5. Install the generator. Refer to Generator Replacement in Engine Electrical.
  6. Install the drive belt. Refer to Drive Belt Replacement .
  7. Refill the engine coolant. Refer to Cooling System Draining and Filling in Engine Cooling.