Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
| Turn the parklamps on.
| The following lamps are all on:
|
|
2
|
- Turn the ignition switch to the RUN position.
- Operate the turn signal switch to the left or the right position.
|
| • | The park/turn and tail/stop/turn lamps flash continuously on and
off. |
| • | The turn signal indicator flashes on the IP according to which
position the turn signal switch is in. |
|
|
3
| Turn the turn signal switch off.
| The park/turn and tail/stop/turn
lamps are off.
|
Turn Signal Lamps Always On - One Side
|
4
|
- Turn the Ignition to the OFF position.
- Turn the hazard switch on.
|
| • | The park/turn and tail/stop/turn lamps flash continuously from
minimum intensity to maximum intensity. |
| • | Both turn signal indicators flash on the IP. |
|
|
5
|
- Turn the hazard switch to the OFF position.
- Turn the ignition switch to the RUN position.
- Depress the brake pedal.
| The center high mounted stop lamp, tail/stop/turn lamp, and tail/stop
lamp (Chevrolet Only) are on.
|
|
6
| Release the brake pedal.
| The stop lamps turn off.
|
Stop Lamps Always On
|
7
| Turn the ignition to the RUN position.
| The Daytime Running Lamps (DRL)
turns on.
| • | Daylight -- the park/turn lamps are on (non-flashing). |
| • | Low light -- the park/turn lamps, side marker lamps, and
low beam headlamps are on. |
|
Daytime Running Lamps (DRL) Inoperative, Headlamp Switch Operates Normally
|
8
|
- Set the park brake.
- Turn the ignition to the RUN position.
| The Daytime Running Lamps (DRL) are off.
|
Daytime Running Lamps (DRL) Inoperative, Headlamp Switch Operates Normally
|
