GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Camaro 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Side Marker Lamp Replacement

Removal Procedure

    Object Number: 366724 Size: SH
  1. Remove the sidemarker lamp screw from the front fascia.

    2. Object Number: 402703 Size: SH
  2. Remove the side marker lamp from the front bumper fascia.
  3. Disconnect the electrical connector from the sidemarker lamp.
  4. Remove the side marker lamp.

Installation Procedure

    Object Number: 402703 Size: SH
  1. Connect the electrical connector to the side marker lamp.
  2. Install the side marker lamp to the front bumper fascia.

    3. Object Number: 366724 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the sidemarker lamp screw to the front fascia.

    4. Tighten
    Tighten the sidemarker lamp screw to 1 N·m (9 lb in).