GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Camaro 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Dome Lamp Replacement

Removal Procedure

    Object Number: 294786 Size: SH
  1. Remove the dome lamp bolts (1).
  2. Disconnect the electrical connector from the dome lamp.
  3. Remove the dome lamp bulb from the dome lamp.

Installation Procedure

    Object Number: 294786 Size: SH
  1. Install the dome lamp bulb to the dome lamp.
  2. Connect the electrical connector to the dome lamp.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the dome lamp bolts (1).

    4. Tighten
    Tighten the dome lamp bolts (1) to 1.7 N·m (15 lb in).