Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | RH of the IP, left of the IP fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Clutch Pedal Position (CPP) Switch | On the Clutch support bracket | Engine Electrical Component Views in Engine Electrical | Engine Electrical Connector End Views in Engine Electrical |
Four Wheel Drive Indicator Switch | At the front axle, RH of the differential | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Front Drive Axle Clutch Solenoid | In the left rear of the engine compartment, near the cowl | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Instrument Cluster | In the IP, ahead of the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges, and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
IP Fuse Block | RH of the IP, near the side door jamb switch | Power and Grounding Component Views in Wiring Systems | Electrical Center Identification Views in Wiring Systems |
Transfer Case Encoder Motor | RH of the ATC, below the rear transfer case speed sensor connector | Transfer Case Control Component Views in Transfer Case - NP8 | -- |
Transfer Case Encoder Motor Connector C1 (4 cavities) | RH of the ATC, below the rear transfer case speed sensor connector | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Encoder Motor Connector C2 (6 cavities) | RH of the ATC, below the rear transfer case speed sensor connector | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Shift Control Module | Behind LH Front kick panel | Transfer Case Control Component Views in Transfer Case - NP8 | -- |
Transfer Case Shift Control Module Connector C1 (32 Cavities) | Behind LH Front kick panel, the lower connector | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Shift Control Module Connector C2 (4 Cavities) | Behind LH Front kick panel, the upper connector | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Shift Control Switch | Left of the Instrument Panel Cluster | Transfer Case Control Component Views in Transfer Case - NP8 | -- |
Transfer Case Shift Control Switch Connector C1(8 Cavities) | Left of the Instrument Panel Cluster | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Shift Control Switch Connector C2(4 Cavities) | Left of the Instrument Panel Cluster | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Front Propshaft Speed Sensor | Top Front LH Side of the Transfer Case | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Transfer Case Rear Propshaft Speed Sensor | Top RH Rear of the Transfer Case, near the rear driveshaft | Transfer Case Control Component Views in Transfer Case - NP8 | Transfer Case Control Connector End Views in Transfer Case - NP8 |
Underhood Fuse Block | On the top of the right inner fenderwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 cavities) (Body) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 cavities) (Engine) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) | LH of the engine compartment | Engine Controls Component Views in Engine Controls | -- |
Vehicle Control Module (VCM) Connector C4 (24 cavities) | LH of the engine compartment | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
C103 (16 cavities) | Engine harness to the body harness, near the VCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C114 (2 cavities) | Body harness to the front axle switch extension harness, to the left center of the engine compartment, near the EBCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 cavities) | Body harness to IP harness, to the left of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G103 | (CKT 351) Engine harness, to the left rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G104 | (CKT 450) Engine harness, to the right rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G105 | (CKT 451) Engine harness, to the right rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G200 | (CKT 1850) Body harness, to the left front of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
G201 | (CKT 1850) Body harness, to the left front of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
P100 | In the right rear side of the engine compartment, at the bulkhead, above C100 | Harness Routing Views in Wiring Systems | -- |
S106 | (CKT 351) Engine harness, between the breakouts to the VCM connectors and the engine coolant temperature sensor connector, 27 cm (10.63 in) from the breakout for the VCM connnectors | Harness Routing Views in Wiring Systems | -- |
S115 | (CKT 1640)Body harness at the breakout to the park lamp switch relay connector | Harness Routing Views in Wiring Systems | -- |
S116 | (CKT 431) Body harness, 19.5 cm (7.68 in) from the breakout to the windshield wiper motor connector, toward the underhood fuse block | Harness Routing Views in Wiring Systems | -- |
S140 | (CKT 450, CKT 514) Engine harness between the breakouts to the RH rear VSS connector and the transfer case encoder motor connectors, 10 cm (4 in) from the transfer case connector breakout | Harness Routing Views in Wiring Systems | -- |
S152 | (CKT 351, CKT 451) Engine harness between the breakouts for the left rear and right rear engine block grounds, 15 cm (5.9 in) from the breakout to the right rear engine block ground | Harness Routing Views in Wiring Systems | -- |
S201 | (CKT 1807) Body harness 13 cm (5.2 in) from the BCM connnector breakout, toward C211 | Harness Routing Views in Wiring Systems | -- |
S203 | (CKT 241) Body harness 39 cm (15.6 in) from the BCM connector breakout, toward C211 | Harness Routing Views in Wiring Systems | -- |
S209 | (CKT 1850) Body harness 6.5 cm (2.56 in) from the BCM connector breakout toward C211 | Harness Routing Views in Wiring Systems | -- |
S211 | (CKT 1050) In the body harness 6.5 cm (2.6 in) from the G203, G204, and G205 grounds breakout and the ground terminals | Harness Routing Views in Wiring Systems | -- |
S223 | (CKT 300) IP harness, near the IP fuse block, 8 cm (3.15 in) from C217 | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP203 | (CKT 1850) IP harness, on the IP, in front of the ashtray | Harness Routing Views in Wiring Systems | -- |
