Side Door Lock Pillar Garnish Molding Replacement CF5

1. Remove the front and rear door sill trim plates. Refer to Door Sill Plate Replacement .
2. Remove the upper and lower front seat belt anchor bolts.



3. Remove the front side door lock pillar garnish molding from the vehicle. Feed the seat belt through the garnish molding.

1. Install the front side door lock pillar garnish molding to the vehicle. Feed the seat belt through the garnish molding.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the upper and the lower front seat belt anchor bolts.

Tighten
Tighten the screws to 70 N·m (52 lb ft).

3. Install the front and the rear door sill trim plates. Refer to Door Sill Plate Replacement .