GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Blazer - 4WD 🢒 Engine 🢒 Engine Electrical 🢒 Engine Coolant Fan Shroud Replacement

Removal Procedure

    Object Number: 180301 Size: SH
  1. Remove the upper fan shroud bolts.

    2. Object Number: 395858 Size: SH
  2. Remove the coolant recovery reservoir hose from the lower fan shroud.
  3. Remove the upper fan shroud.

    4. Object Number: 382732 Size: SH
  4. Lift the lower fan shroud just enough to disengage the locating tabs from the radiator.
  5. Remove the lower fan shroud from the vehicle.

Installation Procedure

    Object Number: 382732 Size: SH
  1. Install the lower fan shroud in the vehicle.
    2. 1.1. Position the lower fan shroud against the radiator.
    1.2. Engage the locating tabs by pushing down on the fan shroud.

    Object Number: 180301 Size: SH
  2. Install the upper fan shroud.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the upper fan shroud bolts.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 395858 Size: SH
  4. Install the coolant recovery reservoir hose to the lower fan shroud.