For 1990-2009 cars only
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn the ignition switch to the LOCK position.
- Remove the key from the ignition switch.
- Remove the SIR Fuse from the IP fuse block.
- Remove the left sound insulator, if equipped. Refer to Closeout/Insulator Panel Replacement - Center in Instrument Panel, Gauges and Console.
- Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gauges and Console.
- Disconnect the driver yellow 2-way connector located at the base of the steering column.
- Open the IP compartment door, lift stop and allow door to fully open.
- Remove the connector position assurance (CPA) from the passenger yellow 2-way connector located behind the glove box.
- Disconnect the passenger yellow 2-way connector located behind the glove box.
Important: With the SIR Fuse removed and the ignition switch in the ON position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.
