For 1990-2009 cars only
- Inspect if the drive plate deflection is within standard value.
- If the standard value is not within the specified value, replace the drive plate.
- When abnormal wear, sticking torque converter sleeve or oil pump is found, replace the torque converter and/or automatic transmission.
Specifications
The drive plate deflection standard value is 0.2 mm (0.008 in).
Important: When assembling the torque converter and drive plate, be sure to use the correct bolt and length. If the bolts are too long, it may cause damage to the component.
Important: Do not tighten the bolts using an impact wrench.
