GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Aveo HB 🢒 Engine 🢒 Engine Controls and Fuel - 1.6L (L91) 🢒 Exhaust Gas Recirculation Valve Pipe Replacement

Removal Procedure

    Object Number: 1528366 Size: SH
  1. Remove the exhaust gas recirculation (EGR) pipe mounting bolts from the intake manifold.

    2. Object Number: 1528365 Size: SH
  2. Remove the EGR pipe mounting bolts from the EGR valve.
  3. Raise and suitable support the vehicle. Refer to Lifting and Jacking the Vehicle .

    4. Object Number: 1528364 Size: SH
  4. Remove the lower mounting bolt attaching the EGR pipe to the intake manifold.
  5. Remove the EGR pipe.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1528364 Size: SH
  1. Install the EGR pipe and the lower bolt attaching the EGR pipe to the intake manifold.

    2. Tighten
    Tighten the EGR pipe mounting bolt to 12 N·m (106 lb in).


    Object Number: 1528365 Size: SH
  2. Install the EGR pipe mounting bolts to the EGR valve.

    3. Tighten
    Tighten the EGR pipe to EGR valve mounting bolts to 10 N·m (89 lb in).

  3. Lower the vehicle.

    4. Object Number: 1528366 Size: SH
  4. Install the EGR pipe mounting bolts to the intake manifold.

    5. Tighten
    Tighten the EGR pipe to intake manifold mounting bolts to 12 N·m (106 lb in).