GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Aveo 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Ignition Coil Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1289500 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the electronic ignition (EI) system ignition coil connector.
  3. Note the ignition wire location and remove the ignition wire.
  4. Remove the EI system ignition coil retaining nuts.
  5. Remove the EI system ignition coil.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1289500 Size: SH
  1. Install the EI system ignition coil into the mounting location and install the retaining nuts.

    2. Tighten
    Tighten the EI system ignition coil retaining nuts to 10 N·m (89 lb in).

  2. Connect the EI system ignition coil connector.
  3. Connect the negative battery cable.