GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Avalanche - 4WD 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 1-2-3-4 Clutch Backing Plate Retaining Ring Measurement

Object Number: 1696425 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Install the 1-2-3-4 and 3-5 reverse clutch housing with the 1-2-3-4 clutch plates installed, onto the torque converter housing.
  2. Install the DT 47868-2 magnetic base adapter onto the torque converter housing.
  3. Install DT 47868-1 pack travel weight and DT-47868-3 travel weight adapter onto the 1-2-3-4 clutch backing plate.
  4. Install the J 26900-13 magnetic base onto DT 47868-2 magnetic base adapter .
  5. Attach the J 8001 dial indicator set to the J 26900-13 magnetic base and zero out the dial indicator on the DT 47868-1 pack travel weight .

Special Tools

    • DT 47868-1 Clutch Pack Travel Weight
    • DT 47868-2 Magnetic Base Adapter
    • DT-47868-3 Clutch Travel Weight Adapter
    • J 8001 Dial Indicator Set
    • J 26900-13 Magnetic Base

For equivalent regional tools, refer to Special Tools.

1

1-2-3-4 Clutch Apply Passage

Tip
Apply compressed air to the apply passage hole, at least 3 times and observe the dial indicator measurement each time. This action "fluffs" the clutch plates to ensure an accurate measurement. Refer to Clutch Backing Plate Retaining Ring Specifications .