Preliminary Procedure

Open the liftgate in order to access the left tail lamp assembly screws.

1

Tail Lamp Assembly Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Tail Lamp Assembly Locator Pin (Qty: 2)

Tip
Upon tail lamp removal, some effort is needed to disengage the locating pins from the rear body panel retainer nuts.

3

Tail Lamp Retainer Nut (Qty: 2)

4

Tail Lamp Wiring Harness Assembly Connector

5

Tail Lamp Assembly

Tip

1. The bottom bulb in the left tail lamp is the rear fog lamp bulb and will have a red lens. This is an export only item.
2. Upon installation, push inward on the tail lamp in order to seat the 2 locating pins.